AeroGarden Customer Service & Support

AeroGarden 6 and 6 Elite



Colors: Black, White, Silver and Elite

Not in Production

Certifications: ETL

Shipping Deminsions: 21" x 13" x 14"
Garden Deminsions: 15.5"H x 18"W x 10.5"D (22"H when extended)
Holds: 3.5 quarts or 3.2 liters of water
Weight: 15 lbs

Power Ratings: ~42W of power. Ratings ~120VAC, 60Hz, 1.5A




Light Cycles (Aerator runs 24 hours)


Garden Settings

Lights On



Salad Greens






Live Plants





  1. Press and hold the 'Select' button for about 6 seconds, which will start the diagnostic test.  During the test,
    the panel lights, grow lights, and pump will come on and then off if they are working properly. 





Factory Reset: 
With the grow lights on:

  1.  Choose a plant selection other than Live Plants
  2. Press and hold the Select button for about 5 seconds until the selection lights begin to circle around.  Release the "Select" button as soon as the lights begin circling. 
  3. With the lights still circling, press and release the Reset button (do not press and hold the button)
  4. The plant selection will return to Vegetables and the Add Nutrient light will flash 3 times.
  5. The unit is now reset and the pump will start.  
Resetting the "Replace Grow Bulbs" Cycle (if prematurely replacing bulbs):
  1. Unplug the AeroGarden and replace the bulbs.
  2. Press and hold the "Lights" button until it the LED light next to "Replace Bulbs" flashes
  3. Press Reset.

**Keep in mind** This is for resetting the grow bulb replacement cycle if the bulbs are being replaced before or after the 6 month timer goes off.  If the light is blinking the customer only needs to press and release the "Reset" button quickly to reset the timer.