MY CART - $0.00

You have no items in your shopping cart.

 

AeroGarden Customer Service & Support


How to set the light timers


Basic Instructions to set lights to turn "On" at a specific time (all AeroGarden models models EXCEPT SpaceSaver6 and AeroGarden 3):

 

Decide what time of day you want the lights to come on, and at that time of day, follow this procedure:

  1. Make sure the lights are on. If they are off, quickly press and release the "Lights" button so they are on. (Lights must be on to reset the timer.)
  2. Press and hold the "Lights" button until the light next to the "Select" button starts blinking (about 5-8 seconds) and continue holding it down until it starts blinking faster (about 10-12 seconds).
  3. Release the button. The AeroGarden's lights will temporarily shut off, and in a few seconds come back on.

The AeroGarden is now set to come on at this time every day.

 

Basic Instructions to set lights to turn "Off" at a specific time:

 

Decide what time of day you want the lights to come off, and at that time of day, follow this procedure:

  1. Make sure the lights are on. If they are off, quickly press and release the "Lights" button so they are on. (Lights must be on to reset the timer.)
  2. Press and hold the Lights button until the light next to the "Select" button starts blinking (about 5-8 seconds).
  3.  Release the button as soon as it starts blinking. When it quits blinking, the lights will turn off.

The AeroGarden is now set to go off at this time every day.

 

 Basic instructions to set lights to turn "On" at a specific time for the SpaceSaver 6 and the AG3:

 

  •         At the time you want the lights to go "On", unplug the SpaceSaver 6 and then plug it back in.

 

To override the programming of the lights and pump on the Pro series, the Extra, the Deluxe, and the Extra Elite, follow this procedure

 

  1.  Plug your AeroGarden into an external timer and plug the timer into a wall outlet.
  2. Set your AeroGarden to the 24-hour Super Grow cycle by moving the "Select" light to the "Strawberries" or "Live Plants" setting, and then pressing and holding the button until the light next to "Strawberries" or "Live Plants" starts blinking.
  3. When it starts blinking, release it. The lights and pump will now be on 24 hours per day.
  4. Set the external timer to go on and off when you want, following the external timer directions.
  5.  

To override the programming of the light cycle only - all AeroGardens:

 

 

  1. Unplug the lamp cord from the hood. Connect the hood to an external power cord (click here to purchase).
  2. Connect the power cord to an external timer plugged into a wall socket (click here to purchase an external timer).
  3. Set the external timer to go on and off when you want, following the timer directions

Rating (5 Being Most Helpful):